Gpsuinet Setup //free\\ Jun 2026

Look for /dev/ttyUSB0 or /dev/ttyACM0 .

Serve NMEA over UDP to a specific host:port: sudo gpsuinet -d /dev/ttyUSB0 -b 9600 -u 192.168.1.50:5000

Setting up the device is straightforward and typically takes less than 10 minutes:

socat /dev/ttyUSB0,raw,echo=0 TCP-LISTEN:5000,reuseaddr

Usually, trackers should be set to UTC 0 for server synchronization. 3. Software Setup

gpsuinet typically uses a config file (e.g., /etc/gpsuinet.conf or ~/.config/gpsuinet/config). Key fields: